Repetier
About
- Username
- Repetier
- Joined
- Visits
- 2,088
- Last Active
- Roles
- Administrator
Comments
-
Ja genau, ist aber auch in diesem Tutorial alles erklärt: https://www.repetier-server.com/gpio-tutorial/
-
Hab es in 1.0.4 auch im verbindungkode reingenommen. Da es die Firmware stört aktivieren wir es halt. Alle anderen haben T0 ohnehin am start aktiv.
-
1.0.4 is now released with some communication fixes that also might help.
-
Bitte vorher mal auf server 1.0.4 aktualisieren. Das scheint bei einigen zu verbesserungen zu führen. Hatte auch gestern jemanden wo die Probleme im ping-pong modus nicht mehr auftraten. Ähnlich mysteriös wie das hier.
-
Ja in der Pro version gibt es dazu einen firmware uploader. Einer der 3 usb Speicher ist ja der von deinem Drucker. Wenn du im firmware uploader den Typ wählst will er wissen welches externe Verzeichnis er nehmen soll und da kopiert er die Datei als…
-
Ausgänge kann man per server Befehl setzen, aber darüber kann man keine Temperaturen lesen. Dazu benötigt man andere Techniken wie analoge eingänge mit Komvertierungstabellen oder SPI/I2C die einen Temperarursensor abfragen. Dies ist gedacht für ext…
-
What drivers are you talking about? The standard host das no drivers at all. Customised versions from manufacturer might have usb driver included. Windows 10 normally installs them when detected. Do you connect using usb or with TCP/IP?
-
Ist ein bug im Host. Die nächste Version wird es richtig machen. Vermutlich April oder ende März,
-
As said V2 has no mixing extruder module at the moment, so no it does not support it. At the moment you would need to heavily modify V1 to have extruder 17-32 use same mixing ratios but use other motors. For own mixing rations there is not enough m…
-
Active ping-pong sends commands 1 after the other while waiting for "ok", just like Octopint and Pronterface do. When it is disabled server will send commands in parallel to speed up communication. With input buffer size 127 no problem so far with P…
-
I already made some changes locally and will surely come back when I have a bit time to fix the homing issues and blinking z axis. It is always good if someone checks critically what is going on.
-
You said with octoprint it works ok. Was this before you changed the extruder? I mean on server it was also working fine before. From what I read before i understand you did. Was that exactly the same file with same temperatures? The fact that it i…
-
Checked config and there is no sign of any code injection causing this. On the other side the images look like the under extrusion has a factor matching 430/280. When you set flow multiplier to 153% would it then look correct? Best adjust it in gcod…
-
The autolevel complete comes from the leveling implementation as end message. In the special case of z max homing there is the extra code which we are more or less discussing about. What it does is to ensure that after homing z=0 is where you expec…
-
Ist doch verrückt. Wenn der Befehl doch gesendet wird sollte er auch funktionieren. Zeigt der server an das der Lüfter an ist danach? Hast du im gcode mal gesucht ob da noch andere M106 /M107 Befehle sind die den hier sichtbaren rückgängig machen? …
-
Please wait for next image. I'm just writing a manual mode where you put the wpa supplicant file in /boot and if you do so image will copy it to the right place and server will disable internal wifi management completely. As a last solution for thos…
-
"enable log communication while printing" should be enough. After all it does not finish so in the end it is still writing there.
-
Ok I did some more tests and it looks like the linux version can not resolve zeroconf host names even if linux it self can. From what I can see it comes from using musl instead of glibc. But we need musl for full static build so it runs on all linux…
-
V1 firmware has no support for 2 mixing extruder at all so that becomes already difficult plus the limit to 6 extruders. V2 firmware has no extruder limit, but due to lack of owning a printer with such an extruder I did not write a module for mixing…
-
The gcode looks perfect and printed well on my server. I also see no command changing steps per mm. It contains set flow to 95% which pruaslicer config does for low layer heights, also I do not like that. It was not invented for that. This makes com…
-
Please ignore the blinking z axis. It comes from probing as it seems. Running manually G30 also causes this. Not sure why this happens but it is in void Motion2::endstopTriggered(Motion3Buffer* act, fast8_t axis, bool dir) { I think. Need to find …
-
Schön zu hören das es auch bei vielen Prusa Minis genau so stabil funktioniert:-)
-
Du kannst damit 5 server aktivieren. Jeder kann beliebig viele Drucker steuern sofern die Hardware das zulässt. Also 5 Pis mit vielleicht 20 Druckern insgesamt wobei da kein limit von unserer Seite existiert. Repetier-Server Monitor ist für ein Use…
-
Hast du dir mal die Befehle im slicer gcode angesehen und manuell gesendet? Ist vermutlich der gleiche, aber man weiß ja nie. Wir schicken ja alles normal 1:1 rüber außer es gibt vom Benutzer eingefügte Ersetzungen. Mit ausnahme wenn der Filter an i…
-
.local requires a client that supports zeroconf. Server it self uses linux for name resolution so I would expect anything linux can resolve to work. So if you run under linux ping camserver.local does it resolve the hostname?
-
Strange - my Prusa MK3 das 280.00 in eeprom. When you check eeprom in server you also have correct resolution? You can give me a download link for the print and I try. Have also a prusa so should be easy to see if it works for me with same code. At…
-
BED_X_MIN etc are defines while value smight be changed dynamically. Therefore we call PrinterType::getBedRectangle(xMin, xMax, yMin, yMax); which sets xyMinMax to the values of the bed depending on the printer type active. For deltas it is e.g. tak…
-
Here you see attempts to connect so port is visible, but there is no response from the printer so server closes connection and opens again. Assuming it worked before you have baud rate and port set correctly. You should try if changing the end value…
-
Please check if the flow multiplier in server is not on 100%, also that is default on connect. The only other way to get it wrong would be to change steps per mm with a gcode, but server does not do that. Just to be sure - does your gcode contain a…
-
You are right and it is on my list. Just recently added this to 1.0.5.