Repetier
About
- Username
- Repetier
- Joined
- Visits
- 2,088
- Last Active
- Roles
- Administrator
Comments
-
If I understand you correctly not. You always need to trigger the z endstop for homing and that height can only be changed physically. If you have only one endstop that z offset should be 0. You can go up after hitting z endstop on homing with #defi…
-
Nimm das sudo raus. Es gibt keinen Grund das als root auszuführen. Mit sudo müsste curl in sudoers für repetieruser stehen. Mit der aktuellen Server Version kannst du das aber auch direkt in den Web Aktionen einrichten. PUT wird ja jetzt auch unters…
-
Hast du ein Display angeschlossen? In dem fall AP auf nie aktivieren setzten damit er nicht wegen Verbindungsprobleme hin und her wechselt. Ansonsten Feb 26 04:20:38 Repetier-Server dhcpcd[561]: wlan0: carrier lost ist das Problem. Wie gut ist denn…
-
Might already be fixed. Please check if 1.0.3 still suffers that problem. If so please provide an example. There was a problem when you extruded at e.g. 10mm height after homing a 10mm extrusion height was assumed since that is the layer height diff…
-
Ja sollte produktiv kein problem sein. Enthält nur bug fixes und ein paar neue features die man aber erst nutzen muss. Aber soweit keine bugs bekannt. Nur evtl. spaäter dann finale version noch mal genau so installieren.
-
In windows 7 you need to manually install the usb driver for your printer to make it appear. Otherwise it appears as unknown device. So check the anet homepage for the appropriate driver. If you know the driver you might also find alternative source…
-
Versuch bitte mal die beta 1.0.4 herunterzuladen und auf dem pi zu installieren. Die löst ein Problem mit boards die kein reset ausführen beim verbinden. Per ssh einloggen dann wget https://download1.repetier.com/files/server/debian-armhf/Repetier-S…
-
Z_MIN_PIN must be the same as z probe pin if you want to use z probe for homing.
-
I think with sample prints you mean already sliced files on your printers sd card. Put the sd card into your pc and open the file with one of the programs.
-
Both are the same with that respect. For cnc it might come in V2 but since I'm very busy do not rely on any time plans. It has no priority since we focus on fdm mainly.
-
You always read much about next release here. Just because I fix problems reported here so they will work in next release. That is what I meant when I said I have no complete map.
-
This is not a question of cpu power. It also no error on server side. Server just sends the moves to the printer. The printer firmware computes speeds in a way that no layer shift should happen. I say should because if you configure max. speed or ac…
-
You mean to set a coordinate system or for using z height map for something? As said you can only test from top at set xy positions. It is not possible to detect a object position by testing from sides like you do in cnc.
-
For linux you can already download 1.0.4 beta if it is urgent. Final release next week I hope. Still 2 features open I want to add for that release plus some testing.
-
Danke ist bekannt. Ein Fehler wenn man die info Datei 2 mal einliest wird die Extruderliste nicht zurück gesetzt und die Nutzung erscheint ab 33 noch mal identisch. Ist rein kosmetisch und ist ab 1.0.4 dann wieder behoben.
-
Do you have a display and can you connect a keyboard to switch locally to a console. If linux is still running you could check the state that way. If you have is the server still running on it locally? In the other case you need to reboot and hope …
-
When you connect to server you need use the server connector and port is normally 3344. Do not confuse it with the regular TCP/IP connector which will not work. As a test call http://serverip:3344 on your browser. If you see server gui the server c…
-
Direction comes from this setting: // set to false/true for normal / inverse direction#define EXT0_INVERSE false so set it to opposite or rotate motor connector 180°.
-
Projekte sind ja in erster Linie für Modelle also STL und OBJ Dateien die auch gerendert werden, können aber alles speichern.
-
Load them in a host software with gcode preview. Repetier-Host or Repetier-Server Pro can do that.
-
Geh im touch screen in Einstellungen-> Screensaver und setze timeout auf 0 minuten um es abzuschalten. Das dimmen kommt von uns das komplette ausschalten vom linux screensaver den man im gleichen menu getrennt deaktivieren kann. Das ist vermutlic…
-
Which OS are you using? Have you installation permissions? The port is 3344 not 3144 in case you really use the wrong port.
-
Repetier-Firmware has no setting for this. Most displays activate background directly from main power.
-
Watch out for driver temperature. If it gets too hot it will disconnect motors and also loose steps. Also if current gets too high motors will vibrate when standing still.
-
You mean a physical object placed on bed and probe shape? You can do that with G30 command and move between positions with G0. Use start height higher than highest object part. And make sure that no other object would collide while testing - after a…
-
Strange value but ok if it is set that way it explains the errors with 127 bytes.
-
Einfach im web frontend in das Projekt gehen und auf "Datei hochladen" klicken. Direkt reinkopieren ist sehr schlecht weil der server das nicht sieht und die Vorschaubilder (unterschiedliche größen) nicht berechnen kann. Also immer über die Projekta…
-
Please check maximum xy speed in server settings. There is a bug in autodetection with repetier firmware that sets this to 1 or 2mm/s causing very high times. Set them to the real maximum values and times will drop massively. Will be fixed in 1.0.4
-
No. It would not work as many new features are from user wishes and detected problems in special conditions. You can not make a map for that. Next big feature planned is slicer integration. And next release gets gpio support for raspberry/linux. Of…
-
And on internet side it is https://routerip:forwardport