#define Z_PROBE_Z_OFFSET 0

#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]

#define DOUBLE_STEP_DELAY  in a Range from 0 to 10 , (Optimum seems around 3 )

#define BENDING_CORRECTION_A 0

One thing you should be aware of is setting #define ENDSTOP_Z_BACK_ON_HOME 10 or higher. Only that way you do not touch too fast the endstops since deltas have after homing 0mm play to the sides and m

For delta only z is relevant, so  #define ENDSTOP_Z_BACK_MOVE 3

#define MIN_DEFECT_TEMPERATURE -10

#define FEATURE_Z_PROBE 1

 #define SDSUPPORT 1

#define EXT0_WAIT_RETRACT_TEMP 150

#define FEATURE_Z_PROBE 1

#define AXIS_STEPS_PER_MM ((float)(MICRO_STEPS * STEPS_PER_ROTATION) / PULLEY_CIRCUMFERENCE)

#define EXT0_STEPS_PER_MM 413 //385

#define ENDSTOP_PULLUP_X_MIN true

#define UI_DISPLAY_RS_PIN 32

#define UI_DISPLAY_RS_PIN 14

#define ENDSTOP_PULLUP_X_MIN false

In section "Z- probing" in configuration.h, in documentation. I read that: " #define Z_PROBE_PIN 63 "

#define NUM_EXTRUDER 3

#define Z_PROBE_HEIGHT 22