#define EPR_DELTA_DIAGONAL_CORRECTION_B 937

I didn´t find any "#define interrupt_time" or something like that yet.

#define PAUSE_START_COMMANDS "G28\n\rG90\n\rG1 Z300\n\rG1 X99 Y56"

#define SDSS    4// 4,10,52 if using HW SPI.

#define MIN_HARDWARE_ENDSTOP_X true

#define MIN_HARDWARE_ENDSTOP_X true

2) No, it is#define DELTA_SEGMENTS_PER_SECOND_PRINT 180 // Move accurate setting for print moves

#define ENABLE_BACKLASH_COMPENSATION 1

#define X_MAX_LENGTH 290

#define ORIG_E1_STEP_PIN         -1

#define DELTA_FLOOR_SAFETY_MARGIN_MM 15

#define TEMP_0_PIN         15   // ANALOG NUMBERING

Here is a part of the Config.h: #define NUM_EXTRUDER 1

#define Z_PROBE_ON_HIGH false

#define Z_PROBE_ON_HIGH false

As I'm using A4988, I set #define STEPPER_HIGH_DELAY to 1. No changes.

inverse.If I set "true" for the "#define INVERT_Z_DIR" then z-probe moved wrong direction for the z-axis.

#define PAUSE_START_COMMANDS "G1 x10 y100 z200 f1000\nM104 S0"

#define DECOUPLING_TEST_MAX_HOLD_VARIANCE 300

#define EXT0_X_OFFSET 0