#define X_ENABLE_ON 1

#define MULTI_ZENDSTOP_HOMING 0

#define CASE_LIGHTS_PIN 11

made by hand is the line 416 of reperier.h #define start_step_whith_high 0.! everything else is standard.

#define ENDSTOP_X_RETEST_REDUCTION_FACTOR 3

#define MULTI_ZENDSTOP_HOMING 0

I am working araund the schematics of radds. There are a capacitor (10nF) from signal and gnd. I have a pullup ( into the processor #define actived) that should keep the tension high. Ok ; my endstop

Ok, but i have #define endstop_pullup_(all)_min ( and Max) set to true, i have #define endstop_(all)_(min and max)_inverting false and #define (min and max)_hardware_endstop_(all) true.

#define ALWAYS_CHECK_ENDSTOPS 1

#define UI_INVERT_MENU_DIRECTION 0

#define DUAL_X_LEFT_OFFSET -60

#define X_MAX_LENGTH 320

#define DEFAULT_PRINTER_MODE 2

#define XAXIS_STEPS_PER_MM 80 #define YAXIS_STEPS_PER_MM 80 #define ZAXIS_STEPS_PER_MM 400

#define FAN_PIN 9 <---  change to 5

#define FEATURE_WATCHDOG 1

#define SUPPORT_LASER 1  <------ needed to support Laser

#define LANGUAGE_EN_ACTIVE 1 // English

#define LANGUAGE_EN_ACTIVE 1 // English

#define U8GLIB_SH1106_SW_SPI