"// 10 if using HW SPI. 53 if using SW SPI#define SDSS    53"

"// 10 if using HW SPI. 53 if using SW SPI#define SDSS    53"

 #define Z_HOME_DIR 1 

If not, see . */ #ifndef CONFIGURATION_H #define CONFIGURATION_H /**************** READ FIRST ************************ This configuration file was created with the configuration tool

#define ENABLE_SOFTWARE_SPI_CLASS 1

open pins.h    goto line 250  and change from : #define EEPROM_AVAILABLE 1  to

#define ENABLE_SOFTWARE_SPI_CLASS 1

#define ENABLE_SOFTWARE_SPI_CLASS 1

#define START_STEP_WITH_HIGH 0

#define FEATURE_CONTROLLER 0   (actually it´s set to7)

#define FEATURE_CONTROLLER 0   (actually it´s set to7)

#define BAUDRATE 115200

#define ENABLE_SOFTWARE_SPI_CLASS 1

I guess you could set #define Z_PROBE_HEIGHT 0  then home Z and measure the distance from bed to nozzle,then enter that distance into z probe height, this can be edited in the eeprom.

#define Z_PROBE_X1 70

#define Z_PROBE_X1 70

#define Z_HOME_DIR 1 ; set to -1 for Z min homing.

#define Z_HOME_DIR 1 ; set to -1 for Z min homing.

#define CONFIGURATION_H

#define ENABLE_SOFTWARE_SPI_CLASS 1