#define UI_DISPLAY_RS_PIN    63    // PINK.1, 88, D_RS

#define UI_HAS_KEYS 1

//#define ADVANCED_OK

    #define EXT0_HEATER_PIN HEATER_0_PIN

#define DEFAULT_MAX_FEEDRATE          { 200, 200, 2, 25 }

    #define HEATED_BED_HEAT_MANAGER 0

Try lowering #define HEATED_BED_PID_INTEGRAL_DRIVE_MIN 80 in eeprom.

#define MIN_HARDWARE_ENDSTOP_Z true

#define HAVE_HEATED_BED 1

#define FEATURE_Z_PROBE 1

#define Z_PROBE_Z_OFFSET 0

#define Z_PROBE_X_OFFSET 53.87 #define Z_PROBE_Y_OFFSET -13.54 #define ZHOME_X_POS 100 #define ZHOME_Y_POS 100

#define Z_PROBE_Z_OFFSET 0

*/ #ifndef CONFIGURATION_H #define CONFIGURATION_H /**************** READ FIRST ************************ This configuration file was created with the configuration tool. For that

#define DISTORTION_START_DEGRADE 0.5  ;<<full correction until

#define FAN_PIN 11

#define Z_PROBE_BED_DISTANCE 1.99      <<<set this to 5, distance to raise Z between probe points

 #define  _WRITE(IO, v)   do { if (v) {DIO ##  IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ##  IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)

#define Z_PROBE_X1 15   ;<< change this to 70 to allow for probe X offset, so probe is not right at the edge ob the bed

#define Z_PROBE_Z_OFFSET 0