#define CONFIGURATION_H

#define DOUBLE_STEP_DELAY 0 // time in microseconds

#define ALWAYS_CHECK_ENDSTOPS 1

// ################ Endstop configuration ##################### #define ENDSTOP_PULLUP_X_MIN true//false #define ENDSTOP_X_MIN_INVERTING true //boşta endstop kapalı değer döndürüyor #define MIN_H

#define FEATURE_I2C_MACROS false

#define CUSTOM_EVENTS

After adding #define CUSTOM_EVENTS  there is some error in compiling:

#define CUSTOM_EVENTS

my #define DELTA_SEGMENTS_PER_SECOND_PRINT 

If you meant JAM_ACTION 2 and not JAM_METHOD then the blocking comes after your code, which might be a problem. Have added a #define EVENT_JAM_DETECTED_END {} which runs at the end of the detection.

I use to detect the jam version 2. The printer gets paused well. However, the extruder remains on the model. Adding my code in the event the jam (#define EVENT_JAM_DETECTED {}) I forced him to come to

#define PAUSE_START_COMMANDS ""

#define DISTORTION_EXTRAPOLATE_CORNERS 1

2) The important setting is "#define DISTORTION_CORRECTION_R 100" which I have set to 30 right now. I tested from 80 all way down to 30. 30 was the one that finally stopped giving me  Apos x

#define DISTORTION_XMIN -40

#define DISTORTION_XMIN -40

#define DISTORTION_CORRECTION 1

#define Z_PROBE_SPEED 2

#define Z_PROBE_Z_OFFSET 0

#define Z_PROBE_Z_OFFSET 0