#define HEATER_3_PIN     11

#define HEATER_3_PIN     11

#define PRINTLINE_CACHE_SIZE 16

*/ #ifndef CONFIGURATION_H #define CONFIGURATION_H /**************** READ FIRST ************************ This configuration file was created with the configuration tool. For that

#define CONFIGURATION_H

#define DISTORTION_CORRECTION 1

I have added "#define FAST_COREXYZ 1" in the configuration.h and also set the drive system to 1.

#define ENDSTOP_PULLUP_X_MIN true

#define DRIVE_SYSTEM 2

#define DELTA_SEGMENTS_PER_SECOND_PRINT 10 // Move accurate setting for print moves

#define DELTA_SEGMENTS_PER_SECOND_PRINT 10 // Move accurate setting for print moves

#define NUM_EXTRUDER 2

Last not least, the printer works without issues for homing/moving with same firmware (1.0.-dev). All I did was adding "#define FAST_COREXYZ 1" to configuration.h and compile. Steps/mm for X

#define XAXIS_STEPS_PER_MM  160                          

#define HEATER_PINS_INVERTED 1

#define ALWAYS_CHECK_ENDSTOPS 1

#define MULTI_ZENDSTOP_HOMING 0

#define MULTI_ZENDSTOP_HOMING 0

#define MM_PER_ARC_SEGMENT 1

#define HEATED_BED_HEATER_PIN 9 , standard for Ramps is