#define UI_MATRIX_ACTIONS {UI_ACTION_IDENT01, UI_ACTION_IDENT02,       UI_ACTION_IDENT03,      UI_ACTION_IDENT04,\

#define MOTHERBOARD 999

#define PINS_H

#define EXTRUDER_IS_Z_PROBE 1

On #define EXTRUDER_IS_Z_PROBE 1, however, the autoleveling function is in the wrong position.

#ifndef PINS_H#define PINS_H

on pins.h I already have deifine it as #define TWI_CLOCK_FREQ          400000. I just double check it.

#define SHARED_EXTRUDER_HEATER 0 in your config file

I take it that the last two digits in #define NUMTEMPS_14 46 tell how many enteries there are. Great. Ok I can recount and change that. With this information, I can try a few different tables and see

#define ZHOME_X_POS 0

#define NUMTEMPS_13 9

#define SDCARDDETECT ORIG_SDCARDDETECT

#define SHARED_EXTRUDER_HEATER 0 in your config file

#define Z_PROBE_RUN_BEFORE_EVERY_PROBE "G4 P200"

#define TWI_CLOCK_FREQ          400000

#define Z_PROBE_RUN_AFTER_EVERY_PROBE "G4 P200"

#define SPI_PIN         77

#define SDSS    4// 4,10,52 if using HW SPI.

#define CONFIGURATION_H

#define UI_TEXT_WIZ_WAITTEMP1_DE "Mine austauschen"