@Repetier, I tried changing the zhoming to the folowing:#define HOMING_ORDER HOME_ORDER_ZXYTZ

#define CONFIGURATION_H

3) in manual for this controller is written, that i should use  "#define U8GLIB_ST7565", but in new firmware only

#define X_STEP_PIN     37

So if I change this line:  #define Y_MIN_POS 0 to something else, when I do a home, it will set Y to the value set by this statement?

#define DAVINCI 4

OK so i'm getting somewhere.... i turned #define ENDSTOP_Z_MIN_INVERTING to FALSE and Z_PROBE_ON_HIGH to FALSE and the auto level would run it's 3 points. Thanks for all the help i'm starting to feel

Sorry, I also forgot to mention that in order to work correctly, #define UI_DYNAMIC_ENCODER_SPEED should be 0

#define AUTOLEVEL_GRID 24  // Distance between autolevel Z probing points, should be less than print surface radius/3.

The parameter #define UI_ENCODER_SPEED was already set to 2 in all instances in ui.h

#define ENDSTOP_PULLUP_Z_MIN true #define ENDSTOP_Z_MIN_INVERTING true #define MIN_HARDWARE_ENDSTOP_Z true

#define ENDSTOP_PULLUP_Z_MIN true #define ENDSTOP_Z_MIN_INVERTING true #define MIN_HARDWARE_ENDSTOP_Z true

#define UI_ENCODER_SPEED 1

#define ENCODER_PULSES_PER_STEP 4

#define ALWAYS_CHECK_ENDSTOPS 0

In Marlin I just have #define Z_PROBE_OFFSET_FROM_EXTRUDER -0.55 and automatic bed leveling works perfectly. What do I do wron in Repetier?

#define FEATURE_SERVO 0

#define CONFIGURATION_H

I wonder if it is something I have messed up in the firmware config file (I used both #define BLUETOOTH_SERIAL 2 (as well as -1) and I have changed "bluetoothSerial": 2 in the connection str

#define FILAMENTCHANGE_X_POS 0