#define Z_PROBE_Z_OFFSET 0

Hey, just a quick update. Took me a while to get back to it but the second #define option worked a treat.

#define HEATER_PINS_INVERTED 1

2mm/s based on your#define Z_PROBE_SPEED 2

#define NUM_TEMPS_USERTHERMISTOR0 103

#define DISTORTION_CORRECTION         1

#define BLUETOOTH_BAUD  250000

1) There are 2 solutions #define X_MIN_POS -45

If I set #define FEATURE_CONTROLLER 0 from 11 it compiles and works fine (with no LCD/controller support) 

#define Z_PROBE_BED_DISTANCE 10, I do 3,8+6,2 G1 z6,2; G92 Z10. The position real in TIPS probe and nozzle are 10mm or can avoid the #define Z_PROBE_BED_DISTANCE 10.

a)  #define ALWAYS_CHECK_ENDSTOPS 0

#define Z_PROBE_Z_OFFSET 0

* changed #define EXT0_JAM_PIN -1 to 42 in configuration.h

 #define  _SET_OUTPUT(IO)  do {DIO ##  IO ## _DDR |=  MASK(DIO ## IO ## _PIN); } while (0)

#define ENDSTOP_PULLUP_X_MIN true

#define X_MAX_LENGTH 350

#define ENDSTOP_PULLUP_X_MIN true

#define MICROSTEP_MODES { 16,16,16,8,8 }

 #define UI_ERROR_UPD(status) {uid.setStatusP(PSTR(status),true);uid.refreshPage();}

#define Z_PROBE_HEIGHT 1