Repetier
About
- Username
- Repetier
- Joined
- Visits
- 2,088
- Last Active
- Roles
- Administrator
Comments
-
Auflösung kann ein Problem sein, wenn die Bandbreite nicht da ist. Daher würd eich tests erst mal bei 640x480 15fps machen. Ist ja weniger als die logitech da sollte die Bandbreite passen. Log dich per ssh ein und lass mal "top" laufen. mjpg_streame…
-
With slic3r I mean to edit your selected print configuration and safe it again. That is when it stopped making that strange problem for me. It is not stl dependent. It must be in the slic3r config files and since I saved it again it was rewritten wi…
-
Is the bl touch blinking? Blinking is error state and indicated by triggered end stop. Otherwise the signal gets disabled after 10ms. If it does not blink you might need to invert end stop. No idea if that is necessary in marlin though.
-
Strange thing. Tried to change it my self and it was not coped just like in your case. I saw a setting I did not like in print settings, so changed and saved it and then filament changes were used. After that I changed filament settings again and th…
-
You need usb connection with ping-pong enabled for the prusa mini.
-
Is this for new prints or do you mean for older prints the data vanished. I'm printing a lot and still have last printing for new printed. Some old fies have none but I know there was a problem with this in the past, so it might got lost already bef…
-
After updating to a newer websocket version it seems to work. So will be solved in 2.2.0
-
Preferred way is now Visual Studio Code with PlatformIO but I think marlin still supports ide as well, but not 100% sure.
-
You can also use e.g- imgur.com to share images.
-
Nein, ich denke das ist nur eine Spielerei um etwas abzufragen. Es bräuchte einen kompletten Konverter zwischen 2 Protokollen der die eigentliche Verbindung übernimmt, dass ist aber nicht die Zielsetzung.
-
Vermutlich nicht. Bei anderen Modellen weiß ich das die ein anderes Kommunikationsprotokol und eine proprietäre firmware nutzen. Ich gehe daher davon aus das dies hier auch der Fall ist.
-
https://www.repetier-server.com/knowledgebase/access-server-from-internet/ is our faq entry. But there so many different routers that we can not go into too much detail. But it shows at least several options depending on your connection.
-
Make sure the filament settings you changed in slic3r is the same setting set in host in slicer tab!
-
Der Lüfter wird nicht gesteuert. Den hast du auf dauerstrom gelegt. Bei meinem hab ich ihn auf 3.3V statt 5v gelegt, macht ihn etwas leiser, aber läuft natürlich weiter. Für einen Kontrollierten Lüfter brauchst du einen der per 3.3V pwm signal gest…
-
You mean you customized the touch screen view? Yes, changes will be lost after update since it will install the new version with all it's updates. Such changes need to be done for every update normally. Your license will stay active if you just upd…
-
Aktiv = exktiver extruder nur, alles = alle extruder. Heizbett und Heizkammer sind immer mit dabei. Es werden die zuletzt verwendeten Temperaturen verwendet, stellt sich also automatisch um.
-
We only have the documentation on our homepage. Of course users have made lots of tutorials, but we have no list of them.
-
In some cases it does not work and I have fixed it for 2.2 coming soon. You can already download a pre release if you adjust the download link to test if we fixed it correctly.
-
My examples were from marlin 2.0.x, but you seem to use the old 1.x branch. So that explains why you do not have all options. CAPs show you have emergency parser " Cap:EMERGENCY_PARSER:1" so M108 should be available, but I'm no marlin expert. Maybe …
-
Ok, small misunderstanding. I thought you meant the mjpg fps setting, but you mean the setting for conversion. I can add 5 and 1 as well to list for those wanting a slow and long video:-) There is no way to recover/combine images from different pri…
-
I think the group stuff goes too far here. Maybe a select all free printer online selection.
-
I see what you mean. Need to think about it especially since monitor has no projects at the moment and that is the only function where groups make sense as far as I can say.
-
A bit like our material management will work. We want to define sample rolls and rolls you have and subtract filament used. When there is not sufficient filament it will warn. With the integrated slicer we plan we also want to enable you to define w…
-
You should also have HOST_PROMPT_SUPPORT enabled. That should show a dialog on server screen on filament runout. M108 is handled in emergency parser which you have activated, no idea why disabling SERIAL_XON_XOFF causes it to not work. There is no…
-
I will check that. It should only stop trying if the wifi is available and connection does not work due to wrong password. That is hard to balance - how often do we need to try etc. and how much delay until to go back to ap. But you are right that w…
-
Check all have steps per mm set and that the virtual extruders in eeprom have assigned a weight to the other motors as well. Only motors with a weight will move.
-
Do you know that you can already share a gcode directory with other printers on same server instance? In printer settings uncheck "Use own g-code Directory" and uploading to one printer shows it in all printers.
-
The MJPG framerate settings have nothing to do with timelapse speed. In printer -> webcam->timelapse you define when to make a snapshot.
-
So you switch on the router and the pi the same time? That explains the behaviour when router wifi is not up then it will switch back. You can test setting server to never enable ap, then it does not switch to ap mode and will use the wifi as soon a…
-
In communication settings of printer in server.